HOW TO CHOOSE AN ALUMINUM CENTER CAP

All SSR wheels are made to be stronger and lighter, and the center of the wheel where the nut is tightened is designed to be as thin as possible to reduce weight. Therefore, on Professor, EXECUTOR, & REINER series, it is necessary to select a high type or low type center cap to prevent interference in cars where the front and rear hubs on the vehicle side protrude high.

The SSR catalog and the specification table on the website show the clearance values ​​when each cap is attached, so please refer to them and choose the size that suits your car. 　

– SSR ALUMINUM RACING CAP –
The SSR aluminum racing cap has different specifications depending on the PCD of the wheel, and is divided into A-type for PCD 98-101.65 and B-type for PCD 108-130.

In addition, you can choose from 3 types of HIGH / LOW / SL (SUPER LOW) according to the hub height of the car from here.
COLOR VARIATION
ALUMINUM RACING CAP [BLACK]
Black anodized aluminum racing cap that matches dark colors such as black and gunmetal.
CENTER CAP CLEARANCE CHECK
Consider the thickness of the center part and select a cap that can secure clearance with the hub.





EXAMPLE OF CENTER CAP FITMENT
The HIGH cap and LOW cap in the figure below can be used because the clearance is secured.
The SL cap cannot be used because it interferes.